News

Olinkphotonics released CFP2 100G ER4 at the beginning of Oct
Published:2015-10-20 10:20:29

Olinkphotonics released CFP2 100G ER4 at the beginning of Oct,The CFP2 ER4 further complete the OLink 100G series

 with lower power comsumption and high performances. Sample are available.  




OLCFxxTXL-CD40

RoHS Compliant CFP2 100GBase-ER4 (40km) Optical Transceiver


PRODUCT FEATURES

l  Duplex LC receptacle optical interface

l  Single +3.3V power supply

l  Hot-pluggable

l  Operating optical data rate up to 112Gbps

l  Operating electrical serial data rate up to 27.952493Gbps

l  4 parallel electrical serial interface

l  AC coupling of CML signals

l  High senstivity ROSA

l  Low power dissipation(Max:12W)

l  Built in digital diagnostic function

l  Operating case temperature range:0℃ to 70℃

l  Compliant with 100GBASE-ER4

l  MDIO Communication Interface

l  Compatible with all kinds of commercial ONT

 

APPLICATIONS

l  Local Area Network(LAN)

l  Wide Area Network(WAN)

l  Switch to router interface

 

Standards

l  Compliant with IEEE 802.3ba

l  Compliant with CFP2 MSA hardware specifications

l  Compliant with CFP2 MSA management specifications

l  Compliant with ITU-T G709/Y.1331

l  Compliant with RoHS

 

 Functional Description

 The 100G CFP2 ER4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four electric-absorption modulated lasers (EMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface.



 

For more details,please contact us by:Tel:+86-755-27215326-624,or email to:sales@olinkphotonics.com